Device Settings; Track Log Settings; You Can Change Some Device Settings To Control The Screen; You Can Set Up Automatic Track Log Saving And Fine-Tune - Nextar X3-09 Software Manual

4.5.9 Device settings

You can change some device settings to control the screen backlight when Nextar Navigation
System is running. Tap the following buttons:
Button
Power Management
Backlight Intensity at
Daytime
Backlight Intensity at Night You can set the backlight level for night use.

4.5.10 Track Log settings

You can set up automatic Track Log saving, and fine-tune related settings. Tap the following
buttons: , ,
Button
Update Interval
Enable Auto-saving
Track Log Database Size
Track Logs Max. Size
Create NMEA/SIRF Log
Description
You can set how the backlight will behave when the screen has
not been touched for a while. You have the following options:
•
Backlight Always On: The screen is continuously lit.
•
Smart: When running on battery, Smart Powersave will
light up the screen only when you tap the screen, or if
there is something to show you. After a few seconds the
light level decreases, and after another few seconds the
backlight turns off. This helps achieve a longer battery life.
You can set the backlight level for daytime use.
.
Description
This determines how often track points will be saved. Position
information is normally received once a second from the GPS. If
you do not need such a detailed log, you can increase this
number to save track log space.
When auto-saving is enabled, you do not need to turn track log
saving on and off manually. Nextar Navigation System will
automatically start recording the track log as soon as GPS
position is available.
This figure shows how much memory is used by the
automatically saved track logs.
You can set the maximum database size for the automatically
saved track logs. When the limit is reached, the oldest
automatically saved track logs will be deleted.
Independently of the normal track log, you can instruct Nextar
Navigation System to record the native GPS data received from
the GPS device. These logs are saved as separate text files on
the memory card, and they cannot be shown or replayed in
Nextar Navigation System.
68
, , .