Table of Contents
Advertisement
•
Tap the screen and tap again to place the Cursor at the desired location. Now tap
to open the Cursor menu.
You can perform the following actions:
Button
Action
In the active route, uses the Cursor as the start point by replacing the
current GPS position (available in Advanced mode only)
In the active route, uses the Cursor as the destination by replacing the
previous destination
In the active route, uses the Cursor as a via point (an intermediate
destination) preceding the destination (available in Advanced mode only)
In the active route, uses the Cursor as the destination while keeping the
previous destination as a via point (available in Advanced mode only)
Shows the different routes calculated by the available routing methods.
Choose the one that suits your needs the best.(available in Advanced
mode only)
Saves the Cursor as a POI(available in Advanced mode only)
Saves the Cursor as a Favorite location
Marks the map with a Pin at the Cursor (available in Advanced mode
only)
Opens a screen with the name, address and coordinate information of
the Cursor, and the list of POIs near it
2.4 Nextar Navigation System concepts
2.4.1 Smart Zoom
Smart Zoom provides much more than just a usual automatic zoom feature:
•
While following a route calculated by Nextar Navigation System: when
approaching a turn, it will zoom in and raise the view angle to let you easily recognize
your maneuver at the next junction. If the next turn is at a distance, it will zoom out and
lower the view angle to be flat so you can see the road in front of you.
•
While driving without an active route in Nextar Navigation System: Smart Zoom
will zoom in if you drive slowly and zoom out when you drive at high speed.
Enabling Smart Zoom
Tap the map to let the map control buttons appear, and then tap
16
to enable Smart Zoom.
Advertisement
Table of Contents
