Gps Settings; Menu Settings; You Can Set Up The Connection To The Gps Receiver; You Can Modify The Look And Behaviour Of The Menu Screens - Nextar X3-09 Software Manual

Button Description
independently:
•
•
Warn if Too Fast for
Enable this warning to be alerted if pedestrian mode is activated and you
a Pedestrian
drive fast. You are asked if you want to change to car navigation mode.
This way you can be sure you will not be routed via one-way roads in the
wrong direction as a pedestrian could, for example.
Safety Mode
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep
your attention on the road. While driving, you will not be able to set a new
destination or to change settings. The only screen control that remains
enabled is the gesture that puts you back on the Map screen.

4.5.7 GPS settings

You can set up the connection to the GPS receiver. Tap the following buttons:
.
Button Description
GPS
The first line of the screen informs you about the connection status of the
receiver ...
GPS receiver.
Connecting the GPS receiver is automatic in Nextar Navigation System, so
normally you will not need this screen of settings at all.
GPS Enabled
Turn the connection to the GPS receiver on or off. Turning off the GPS
receiver can be useful for indoors use or demonstration purposes.

4.5.8 Menu settings

You can modify the look and behaviour of the Menu screens. Tap the following buttons:
, ,
Button Description
Animation You can activate and deactivate the Menu animations. When animation is
turned on, buttons on Menu and keyboard screens appear in an animated
way.
Background
You can choose the image to be used as the menu background image.
Skin
You can choose from a list of available skins to change the look of Nextar

Navigation System.

Audible Warning: A voice message is played using the selected
voice guidance profile.
Visible Warning: A symbol with the speed limit appears in the
corner of the map (for example:
.
67
).
, ,