Table of Contents
Advertisement
Button
Elevation on 2D Map
Show Street Names
Lane Information
4.5.2 Sound settings
You can adjust the sounds of Nextar Navigation System. Tap the following buttons:
,
.
Button
Master Volume
Voice Guidance Volume
Key Sounds
Dynamic Volume
Description
color profiles.
2D maps can also display 3D information. These top-down maps
can display elevation by colors and shading.
Street names and POI icons can be disturbing on the map during
navigation. With this switch you can suppress these map
elements when Nextar Navigation System is following your
position on the map. If you move the map, both the street names
and POI icons reappear immediately.
Some maps contain lane information to help you position your
car in the upcoming intersection. This setting tells Nextar
Navigation System whether to display this information at the top
or at the bottom of the map.
Description
Use the switch to mute all sounds of the device and then to re-
enable them again. The position of the slider determines the
volume level.
The loudness of Nextar Navigation System is independent of
your device settings. When you exit the program, the device
default settings return.
The slider adjusts the loudness of voice prompts. In its leftmost
position, the voice guidance is suppressed; in its rightmost
position, the master volume applies.
Key sounds provide audible confirmation of tapping the touch
screen.
The switch turns key sounds on or off. Key sounds are played at
the master volume level.
When driving at high speed, the noise in the car may be too loud
to clearly hear the voice guidance and other sounds. Using
Dynamic Volume you can instruct Nextar Navigation System to
increase the volume when your speed exceeds a certain
minimum, and reach its highest volume at the given maximum
speed.
62
,
Advertisement
Table of Contents
