Find Menu; Route Menu - Nextar X3-09 Software Manual

4.2 Find menu

Select the destination of your route. Tap the following buttons:
Button Description
If you know at least a part of the address, this is the quickest
way to find the location.
You can select your destination from the thousands of POIs
included with Nextar Navigation System or from the ones you
have previously created.
The destinations that you have already entered in Nextar
Navigation System are available in the History list.
You can select your destination by entering its coordinates.
You can select as your destination a location that you have
already saved as a Favorite.
Opens a special 2D map screen optimized for route planning.
Only the Zoom in and Zoom out buttons and the route
modification buttons of the Cursor menu appear.

4.3 Route menu

Save, load and edit your routes. Tap the following buttons:
Button Description
Opens a screen with useful route data.
You can browse the driving instructions that Nextar Navigation
System follows during navigation. You can exclude
maneuvers or streets to adjust the route to your preferences.
You can modify the route: remove route points or change their
order.
Erase the active route with all its route points (start point, via
points and destination). If you later decide that you need the
same route, you will have to rebuild it from scratch.
You can save the active route for later use.
You can load a previously saved route for navigation.
Opens the Route settings screen with controls to modify the
vehicle, the road types used for route calculation, or the route
calculation method.
,
55
, .
Reference
page 31
page 33
page 33
page 31
.
Reference
page 49
page 19
page 35
page 37
page 38
page 39
page 63