Elements Of The Active Route - Nextar q4 series Instruction Manual

2.3.3.5 Elements of the active route

your software shows the route in the following way:
Symbol
Current GPS
position and
Start point
Destination
(end point)
Map color
Name
Your current position displayed on
the map.
Normally if GPS position is
available, the route starts from the
current position. If there is no valid
GPS position, your software uses
the last known position as the start
point.
The last point of the route.
The map is vivid and colorful when
GPS position is available.
Whenever the current position is not
available, the map turns gray. The
software however may still move the
Vehimarker to show a possible but
not confirmed position.
Description
•
In pedestrian mode it is the
exact GPS position.
•
If a vehicle is selected for
route calculation and roads
are near, the symbol is
snapped onto the nearest
road.
26