Table of Contents
Advertisement
Tip!
If you know that you will use a destination later, when the Cursor menu
appears, save it as a POI, or put it on the list of your Favorites first. The Cursor
menu returns automatically with the same point. Now you can use it as a route
point.
3.1.2 Entering an address or part of an address
If you know at least a part of the address, it is the quickest way to select the destination of the
route.
Using the same screen, you can find an address by entering:
•
the exact address, including house number
•
the center of a city
•
an intersection
•
the midpoint of a street
•
any of the above, starting the search with the ZIP code (page 30)
3.1.2.1 Entering an address (North America)
In some countries, the state is also used in addresses. If you are in one of these countries, or
choose any of them from the list of countries, five lines appear on the screen:
The procedure is explained starting from the Navigation menu.
1.
Tap the following buttons:
mode).
2.
By default, Nextar Navigation System proposes the country, state and city where you
are. If needed, tap the button with the name of the country, and select a different one
from the list. If you select a new country, you also need to select the state, or tap
3.
If you have not changed the country, you still have the possibility to change the state.
Tap the button with the name of the state, and select from the list.
4.
If needed, change the city:
•
To select the city from the list of recently used ones, tap the
•
To enter a new city:
1.
Tap the button with the name of the city, or if you have changed the
country/state, tap
to search for a city regardless of the state it is in.
(Simple mode), or
.
24
,
(Advanced
button.
Advertisement
Table of Contents
