Creating A Multi-Point Route (Appending A New Destination); Editing The Route - Nextar X3-09 Software Manual

3.3 Creating a multi-point route (appending a new destination)

destination Multi-point routes are created from simple routes, so a route must be active first.
One of the ways of expanding the route is to add a new destination. The previous destination
becomes the last via point of the route.
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This will be the additional
destination in the route.
2. The map appears with the selected point in the middle, and the Cursor menu opens
automatically.
3. Tap
4. Tap
previous one to the last intermediate destination.
5. [optional] To add more points to the route, repeat the above steps as many times as
you like.
Every time a new point is added, the route is recalculated automatically and you can start
navigating right away.

3.4 Editing the route

This feature is available in Advanced mode only.
Tap the following buttons:
The list of route points appear with the start point at the top of the list and the final destination
at the bottom. If several via points exist, you might need to scroll between pages.
Tap one of the route points in the list. You have the following options:
Button Action
The selected point moves up in the list (becomes a via point to be reached
earlier). Tap this button repeatedly, and the point becomes the start point of the
route.
The selected point moves down in the list (becomes a via point to be reached
later). Tap this button repeatedly, and the point becomes the final destination of
the route.
The route is reversed. The start point becomes the destination, the destination
becomes the start point, and all via points are to be reached in the opposite order
than before.
The route is optimized. The start point and the destination remain at their
position, but the via points are reordered to make the shortest possible route.
The selected point is removed from the route.
As soon as you leave this screen, the route is recalculated automatically, and you can start
navigating right away.
to open the full Cursor menu with the additional functions.
to add the point as a new final destination demoting the
, ,
35
.