Timecode Counter Window; Effect Editor Window - Yamaha 02R96 Version 2 Owner's Manual

Timecode Counter Window

The Timecode Counter window displays the current timecode position in hours, minutes, seconds,
and frames — or measures, beats, and MIDI clocks — depending on the specified timecode source. It
works in unison with the timecode counters on the 02R96 Automix Main page.
To open the Timecode Counter window, choose [Timecode Counter] from the [Windows] menu.
hour minute

Effect Editor Window

The Effect Editor window enables you to edit the internal effects processors. To open the Effect Editor
window, choose [Effect Editor] from the [Windows] menu.
Note: You can open multiple Effect Editor windows. The second and subsequent open windows will indi-
cate "Locked" in the title, which means that you cannot open Library windows from these windows.
Note: When you recall effects, windows that do not indicate "Locked" in the title will be recalled.
A
F
A Effects processor select
These buttons are used to select the internal effects processors.
B
Effect select section
The EFFECT NAME, TYPE, and IN/OUT are the name, type and I/O configuration of the effect
recalled to the currently selected effects processor. To edit the EFFECT NAME, click it and type. The
[LIBRARY] button opens the Effects Library window.
C
[IN] button
This button is used to set the metering position to the effects processor's inputs.
D
[OUT] button
This button is used to set the metering position to the effects processor's outputs.
E
Meters
These are output meters for the currently selected effects processor.
second frame
B
Studio Manager for V2 02R96 Editor—Owner's Manual
measure beat
3 4 5
G H
MIDI clock
27