Demonstration; Demonstration (Ukázka) - Samsung VP-D130 Owner's Instruction Book

ENGLISH
Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions
that are included with your camcorder so that you may use
them more easily.
The DEMONSTRATION function may only be used in the
CAM mode without a tape inserted in the camcorder.
The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAM
mode.
2. Press the MENU button.
The menu list will appear.
3. Turn the MENU DIAL to highlight
INITIAL.
4. Select DEMONSTRATION from
the submenu and push the
MENU DIAL.
5. To activate the DEMONSTRATION set DEMONSTRATION ON.
Press the menu button to quit the menu.
The demonstration will begin.
6. To end the DEMONSTRATION, set the DEMONSTRATION to
OFF.
Reference
The DEMONSTRATION function only works without a TAPE
installed.
The DEMONSTRATION mode is automatically activated when
the camcorder is left idle for more than 10 minutes after switc-
hing to the CAM mode (no tape is inserted in the camcorder).
If you press other keys (FADE, BLC, PHOTO, EASY,
CUSTOM) during the DEMONSTRATION mode, the
DEMONSTRATION stops temporarily and the demonstration
resume if you do not operate any other functions within 10
minutes.
Pokro‹ilŽ postupy z‡znamu
DEMONSTRATION (Ukázka)
Ukázka automaticky a názornû ukazuje hlavní funkce va‰í
kamery, tak je mÛÏete vyuÏívat mnohem snadnûji.
Funkce DEMONSTRATION mÛÏe b˘t vyuÏita pouze v reÏimu
CAM, kdyÏ ve videokamefie není zaloÏena kazeta.
Pfii spu‰tûné funkci DEMONSTRATION je ukázka uvádûna
stále dokola, dokud spínaã této funkce není vypnut (OFF).
CAM MODE
CAM MODE
INITIAL CLOCK SET
INITIAL SET
CAMERA REMOCON
A/V BEEP SOUND
CLOCK SET
MEMORY SHUT SOUND
REMOCON
VIEWER DEMO
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION
5. Pro nastavení demonstrace nastavte DEMONSTRATION ON.
Stisknûte knoflík menu, abyste menu opustili.
Demonstrace zaãne.
6. Pro ukonãení demonstrace nastavte DEMONSTRATION OFF.
Reference
Funkce DEMONSTRACE pracuje jen bez vloÏené kazety.
ReÏim DEMONSTRACE se automaticky aktivuje,
kdyÏ je kamera nechaná neãinná po více neÏ 10 minut po
pfiepnutí do reÏimu CAM (v kamefie není vloÏená Ïádná kazeta).
Pokud stisknete jiné klávesy (FADE, BLC, PHOTO, EASY,
CUSTOM) bûhem reÏimu DEMONSTRACE, DEMONSTRACE
doãasnû skonãí a znovu zaãne, pokud nebudete pouÏívat
Ïádnou jinou funkci po 10 minut.
CZECH
1. Nastavte reÏim kamery CAM.
2. Stisknûte tlaãítko MENU.
Objeví se seznam nabídky.
3. Otáãením knoflíku MENU DIAL
zv˘raznûte poloÏku INITIAL.
4. S pouÏitím knoflíku MENU DIAL
zvolte poloÏku
DEMONSTRATION z dílãí
nabídky.
39