Installation - Panasonic AJ-CA900 Operation Instructions Manual

Installation

Follow the steps below to attach the unit to the camera recorder.
<Notes>
The spacer must be mounted on the camera recorder before the unit is attached. For details on how to mount the spacer, consult
your dealer.
Depending on the version of the software being used with the camera recorder, it may be necessary to update it, in which case you
should consult your dealer.
1. Make sure that the coin screw used to secure the AJ-CA900P connectors is unscrewed (The screw will be completely
disengaged from the thread.). Mounting the AJ-CA900P with the screw in the closed position could damage the connectors.
M I C
L E V I N C
O M
E L
O N
O F
P P G
M
O N
O
Coin screw
2. As shown in the figure on the left, align the spacer on the
back of the camera recorder with the guide in the unit, and
push the unit in the direction of the arrow until it clicks into
place.
3. Screw the coin screw to the closed position while pressing
down on it.
- 3 -