Table Of Contents; Specifi Cations; Dimensions (Part Names); Caution For Network Connection - Panasonic CZ-CFUSCC1 Installation Instructions Manual

CONTENTS
Safety Precautions ...................................................Cover
Specifi cations .................................................................. 2
Dimensions (Part Names) ............................................... 2
Caution for Network Connection...................................... 2
Installation Precautions ................................................... 2
Installation Location ................................................. 2
General Precautions on Wiring ............................... 2
Mounting .......................................................................... 3
Mounting Position .................................................... 3
How to Mount (Control box) .................................... 3
Wiring .............................................................................. 3
Power Supply Wiring ............................................... 3
Inter-Unit Control Wiring .......................................... 3
External I/O Wiring .................................................. 3
LAN Cable ............................................................... 3
Specifi cations
Model No.
Dimensions (mm)
Weight
Temperature/
Humidity range
Rated voltage/
Rated frequency
Power consumption
Number of connectable
units
*: The number of indoor units includes the Interface Adaptor.
Supplied accessories
Installation Instructions
(1)
* Wiring are not included (fi eld supplied item).
Dimensions
275
44.5 180
Symbols on the controller
This symbol refers to "Protective earth".
This symbol refers to "Caution of Electrostatic".
CZ-CFUSCC1
<H> 255 × <W> 275 × <D> 80
1.9 kg
0 °C to 40 °C /
20 % to 80 % (no condensation)
Single phase
100-240 V ~ 50/60 Hz
Max. 15 W
Indoor unit - Up to 64 units per link*
Outdoor unit - Up to 30 units per link
License List Disc
(1)
(Part Names)
(mm)
80
44.5
Basic Wiring Diagram .............................................. 3
How to Attach the Ring Pressure Terminal .............. 4
Connecting Wiring ................................................... 4
Connecting to External Equipment .................................. 4
Setting ............................................................................. 5
Preparation before Setting .......................................... 5
Adaptor Setting ............................................................ 6
Air Conditioner Setting ............................................... 6
Pulse Meter Setting ..................................................... 7
Network Setting ........................................................... 7
Preparation before Operation ...................................... 7
Test Operation .................................................Back cover

Caution for Network Connection

When connecting to Internet, implement security
measures against illegal access from outside.
For detailed connection and setup method, consult the
network administrator.

Installation Precautions

 Installation Location

 Avoid the following locations for installation.
• Under direct sunlight
• Location near heat source
• Location where the controller will be splashed with water or
affected by dampness or humidity
• Uneven surface
• Location that is subject to excessive vibration or physical
impacts. (Fixing screws may come off, and the controller
may drop.)
 Install the controller away from any sources of
electrical noise.
 Install the controller to the locations where is suitable
to the temperature for using or environment.

 General Precautions on Wiring

 Regulations on wire diameters differ from locality to
locality.
For fi eld wiring rules, please refer to your LOCAL
ELECTRICAL CODES before beginning.
You must ensure that installation complies with all
relevant rules and regulations.
 Use the fi eld supplied wiring with at least 1 mm in
thickness of insulation part including the sheath.
 Connect all wiring tightly to prevent the terminal
board from loosening when the wiring connection
LAN
part is pulled by an external force. (Otherwise, fi re or
overheating may occur.)
 Do not bury the inter-unit control wiring in the ground.
 Do not store the power supply wiring and other wiring
in the same metal tube or bundle them together.
(An operational error from noise may occur.)
This symbol refers to "ON (power)".
This symbol refers to "OFF (power)".
2