Table of Contents
Advertisement
Installation
Installation
Placing the adaptors
Refer to the information on page 6 when selecting a location to place your
adaptors.
Note
•
If you have purchased additional adaptors, make sure you have registered
them to the master (see page 15) before placing them where you plan to use
them.
1.
Connect the AC cord of each adaptor to a wall outlet near where you plan to
use it.
2.
Confirm that the PLC indicator of each adaptor lights in blue when you plug
the adaptors into the wall outlets.
•
If the PLC indicators do not light in blue, see page 16.
After you have placed the adaptors where you plan to use them and plugged them
into the wall outlets, test the terminal's network speed (see page 12).
10
Advertisement
Table of Contents
