Specifications - Panasonic AJ-CA900 Operation Instructions Manual

Specifications

Input: 100 V DC (supplied by AJ-BS900P), 450mA
DC 12V IN (DC 11.5V to 17.0V), 3.2A
Power consumption: 40 W (when camera recorder and 1.5" viewfinder are attached)
10 W (AJ-CA900P main unit only)
Indicates safety-related items.
External dimensions (W x H x D):
Weight:
Operating temperature range:
Storage temperature range:
Operating humidity:
Storage humidity:
Transfer block
Signal transfer rate:
Transfer distance:
Video transfer rate
Y signal:
R-Y signal:
B-Y signal:
RET signal:
Prompt signal:
Audio transfer rate
Signals from camera to base station:
Signals from base station to camera:
Intercom
Microphone selection:
I/O level:
Format:
Lines:
S/N ratio:
Distortion:
Frequency range:
Dynamic range:
Video system
Teleprompt output (PROMPT):
RET output:
Input connectors:
Output connectors:
6-1/8" x 7-7/8" x 6-5/8" (156 x 200 x 168 (mm))
12.1bs (2.5 kg) (including spacer)
32 F - 104 F (0°C - 40°C)
-4 F - 131 F (-20°C - +55°C)
85% or less
0% - 90%
360 Mbps (AJ-CA900P to AJ-BS900P)
300 m with diameter 8.6 mm cable (Fujikura)
500 m with diameter 14.5 mm cable (Fujikura)
18 MHz sampling rate, 10-bit
9 MHz sampling rate, 10-bit
9 MHz sampling rate, 10-bit
FM modulation
FM modulation
46.875 kHz sampling rate, 16-bit
11.71875 kHz sampling rate, 16-bit
Switchable between dynamic microphone and carbon microphone
4-line/2-line: 0 dBm (600 Ω, balanced)
1 Vp-p (200 Ω)
RTS:
0 dB (600 Ω, balanced)
PGM:
Selectable between 4-line, 2-line, and RTS
Base station to camera: 2 lines (ENG, PGM)
Camera to base station: 1 line (ENG)
50 dB or more (base station to camera) (camera to base station)
0.3% or less
100 Hz - 12 kHz (± 3 dB) (camera to base station)
100 Hz - 5.5 kHz (± 3 dB) (base station to camera)
12 dB
1 Vp-p (1 Vp-p input to AJ-BS900P)
1 Vp-p (1 Vp-p input to AJ-BS900P)
Intercom connector:
External power supply input connector: XLR 4-pin
RET SW connector:
Teleprompt output connector: BNC VBS, 1 Vp-p, 75 Ω
(PROMPT)
EXT output connector:
RET signal output connector: BNC VBS, 1 Vp-p, 75 Ω
(RET)
PGM audio output connector: XLR 3-pin
- 8 -
XLR 5-pin
8-pin
XLR 4-pin