Left Side; Right Side - Panasonic AJ-CA900 Operation Instructions Manual

Parts and their functions

Left side

1 2 3
MIC
ON
OFF
PTT
Camera Adapter

Right side

3
4
INCOM
LEVEL PGM
ON
OFF
DIGITAL TRIAX
AJ-
PROMPT PROMPT
OUT OUT
1
RET OUT RET OUT
2
1
Microphone intercom switch (MIC)
Used to switch the intercom line between the ON, OFF,
and PTT settings. (PTT: Audio transmission continues as
long as the switch is held down.)
2
Intercom level knob (LEVEL)
This knob is used to adjust the intercom reception volume
level.
3
Program level knob (PGM)
This knob is used to adjust the intercom PGM volume level.
4
Program line switch
This switch controls the program line multiplexed on the
intercom line. It has two positions: ON and OFF.
1
Prompter video output (PROMPT OUT)
The prompter video signal input to the base station (AJ-
BS900P) is output from this jack.
2
Return video output (RET OUT)
The return video signal (either RET1 or RET2) input to the
base station (AJ-BS900P) is output from this jack.
RET-1 or RET-2 is selected by operating the return select
button (see page 4).
3
Triax connector
This connector is used to connect to the base station (AJ-
BS900P) using a triax cable.
- 5 -