Changing The Display Language - Kenwood XD-A83 Instruction Manual

Changing the display language

You can change the display language manually.
1
Select "Language Options".
MENU
2
Select the desired language.
When you do not recognize which language is displayed:
Press the MENU key so that the display shows "Language Options" (English), "Options de langue" (French),"Sprach-
Einstellungen" (German) , "Opción Idioma" (Spanish) or "Opzioni lingua" (Italian) . Then press the SELECT key to open
the language selection menu.
About the beep sound
When you press the key, a beep sounds. The num-
ber of times that the beep sounds changes de-
pending on the operation.
When a beep sounds
Once: Normal operation
twice: The MENU or ENTER key is pressed.
three times: Abnormal operation (The error
message appears in the display.)
no sound: The key that cannot be operated is
pressed.
You can also set the beep to OFF:
SELECT
ENTER
The following items can be selected by turning the
MULTI CONTROL jog dial.
"CD Program Play"
"Recording Options"
"Tape Dubbing"
"Audio Options"
"Clock Options"
"Surround Setup"
"Language Options"
L a n g u a g e
S e l e c t
The following items can be selected by turning the
MULTI CONTROL jog dial.
"English"
"Français"(French)
"Deutsch" (German)
"Español" (Spanish)
"Italiano" (Italian)
1 Select "Audio Options".
MENU
2 Select "Beep sound".
3 Select "Beep on" or "Beep off".
+Scrolled display
O
(Language Options)
+Scrolled display
L a n
(Select Language)
SELECT
SELECT
SELECT
"Beep on"
"Beep off"
17