Kenwood HM-636 Instruction Manual page 30

To add a track to an existing program
1
Select the track number to be added with
the numeric keys.
Press in stop mode
1 2
4 5
7 8
10 0
2
Press the SET key.
SET
To clear a programed track
Press in stop mode
CLEAR
To clear the entire program
Press in stop mode
PGM
The program mode is canceled when the unit is turned off or the programed disc is ejected. The set program is
cleared entirely at this time.
30
EN
3
6
9
Press the numeric keys as shown below....
To select track No. 23 : +10
To select track No. 40 : +10
÷ Up to 32 tracks can be programed. When "PGM FULL" is
displayed, no more tracks can be programed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
P-5 has been deleted
÷ Each time the key is pressed, the last track in the pro-
gram is cleared.
Goes off
2, 3
X
4, 0
X