Kenwood HM-636 Instruction Manual page 13

RANDOM key (CD)
Press for setting playback of tracks in a random order.
6
VOLUME keys
Press to adjust the volume.
7
Numeric keys
Used to select a CD track number or recall a preset
station of the tuner.
8
÷ PTY ÷ TIME DISPLAY key (For Europe)
Used at the time of program type detection.
Press to switch the displayed time information on CD.
Loading batteries
1
Remove the cover.
Operation
After plugging the power cord of this unit, press the
POWER ( ) key of the remote control unit to turn
the system ON. When the system is turned ON,
press the key of the function to be operated.
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an in-
terval of 1 second or more between keys.
÷ The provided batteries are intended for use in operation checking, and their service life may be short.
÷ When the remote controllable distance becomes short, replace both of the batteries with new ones.
÷ If direct sunlight or the light of a high-frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
¤
$
9
&™
0
&¢
2
Insert batteries.
÷ Insert two R6 ("AA"-size) batteries following the polarity indications.
Operating range (approx.)
TIME DISPLAY key (For other countries)
Press to switch the displayed time information on CD.
SOUND key
Press to switch the sound effect to EX.BASS or
LOUD.
TONE key
Press to adjust the tone.
MUTE key
Press to mute the audio temporarily.
3
Close the cover.
30˚
Controls and indicators System connection
&
%
%
%
Remote sensor
6 m
30˚
13
EN