Skipping Tracks - Kenwood HM-636 Instruction Manual

Start playback/ To pause playback
CD
÷ Each press pauses and plays the CD alternately.
To stop playback
STOP 7
Playback from desired track
Remote control unit only
Select the desired track No.
1
4
7
10
Press the numeric keys as shown below....
To select track No. 23 : +10
To select track No. 40 : +10
Time display on CD player
Each press of the TIME DISPLAY key changes the
displayed contents.
Remote control unit only
÷ ÷
PTY
TIME DISPLAY
(For Europe)
÷ Only time information 1 and 2 can be displayed dur-
ing single-track repeated playback or random playback.
÷ In the program mode, display 3 shows the elapsed
time of the entire program and display 4 shows the
remaining time of the entire program.
÷ When the displayed time is 200 minutes or more,
the display shows "– – : – –".
6
AUTO/MONO
2 3
5 6
8 9
0
2, 3
X
4, 0
X
TIME DISPLAY
or
(For other countries)
To fast forward and backward
Remote control unit only
1
TUNING
Backward
search
÷ Press and hold one of the keys during playback.
Normal playback resumes at the point where the
key is released.

Skipping tracks

4
P.CALL
To skip
backward
÷ The track in the direction of the key pressed is
skipped, and the selected track will be played from
the beginning.
÷ When the 4 key is pressed once during playback, the
track being played will be played from the beginning.
÷ To skip further to a track located before the current
track, press the 4 key quickly.
÷ Tracks can be skipped by pressing the 4 or ¢ key
even when the CD is in stop mode. In this case, play-
back starts automatically from the point reached by
skipping.
Eject the CD
÷ The CD tray will open. (Pressing the key again
closes the CD tray.)
1 Elapsed time of track being played
2 Remaining time of track being played
("REMAIN" lights up)
3 Elapsed time of entire disc
("TOTAL" lights up)
4 Remaining time on entire disc
("TOTAL REMAIN" lights up)
Basic use method Playback of CD
1
Forward
search
4
To skip
forward
17
EN