Kenwood HM-636 Instruction Manual page 40

3
Select the program timer ON/OFF.
1
Select "ON ?" or "OFF ?"
2
Set it.
4
Select ONETIME or EVERYDAY execution of the programed timer.
1
Select "ONETIME" or "EVERYDAY"
2
Set it.
5
Set the ON time then the OFF time.
1
Adjust the time.
The time is
returned
2
Set it.
40
EN
÷ If OFF is selected, the key function return to ordinary
÷ In the ONETIME mode, the timer is set OFF after
÷ In the EVERYDAY mode, the timer is executed every-
The time is
advanced
÷ In other areas than Europe the clock shows the time of
÷ For each of the ON time and OFF time, enter the figure
÷ If you make a mistake, press the mode key and restart
mode.
execution.
day.
the day in the 12-hour system.
of "hour" by performing steps 1 and 2 then enter the
figure of "minute" in the same manner.
from step 2.
Timer operation