Select The Input Source - Kenwood C-707I Instruction Manual

Setting the Timer
72
C-707I C-707I
7 7
Specify the "OFF TIME" (off time).
Use the [<] and [>] keys to set the hour.
Use the [<] and [>] keys to set the minutes.
8 8
Select "PLAY" or "AI PLAY".
Press the [<] or [>] key.
Press the [ENTER] key.
9 9
Set the volume.
Press the [<] or [>] key.
You cannot use the [VOLUME] key to set the volume.
10 10

Select the input source.

Press the [<] or [>] key.
The mode setting cycles as shown below each time you press a key.
TUNER
AUX D.AUDIO
Press the [ENTER] key.
If you selected an input source other than "TUNER", this completes the setting
procedure. The message "COMPLETE" will appear on the display briefl y,
followed by the normal display.
If you selected "TUNER", use the [<] and [>] keys to select a preset number,
and then press the [ENTER] key. This completes the setting procedure.
"COMPLETE" will appear on the display briefl y, followed by the normal display.
Press the [ENTER] key.
Press the [ENTER] key.
Playback is at the volume you set in step 9.
This setting causes the volume to increase
gradually up to the volume level you set in
step 9.
Press the [ENTER] key.
CD iPod
USB