Setting The Program Timer (Program) - Kenwood C-707I Instruction Manual

Setting the Timer
70
C-707I C-707I

Setting the Program Timer (PROGRAM)

This function allows you to use the timer to start playback automatically at
a specifi ed time. You can set two timers (PROG. 1 and PROG. 2) at the same
time.
Set the system clock to the correct time before performing this procedure. (Page 68)
If you want the radio to play when the programmed time is reached, preset the
station before performing this procedure. (Page 44)
Make sure the times for PROG. 1 and PROG. 2 are diff erent by at least one minute to
ensure that their operations do not overlap.
1 1
Press the [TIMER] key.
Press the [<] or [>] key.
Press the [ENTER] key.
2 2
Select "PROG. 1" or "PROG. 2".
Press the [<] or [>] key.
Press the [ENTER] key.
3 3
Select "ON" or "OFF".
Press the [<] or [>] key.
Press the [ENTER] key.
Selecting "OFF" ends the operation and returns to the original display.
Example: PROGRAM 1 off
Example: PROGRAM 1 on