Setting The System Clock - Kenwood C-707I Instruction Manual

Setting the System Clock

Set the system clock to the correct time. If the system clock time setting is not correct, the Program Timer
will not start playback at the correct time.
68
C-707I
1 1
Press the [TIMER] key.
Press the [<] or [>] key.
The current time will appear if clock settings are already confi gured.
Press the [ENTER] key and advance to step 2.
2 2
Set the day of the week.
Use the [<] and [>] keys to set the day of the week.
3 3
Select the timekeeping format.
Press the [<] or [>] key.
12-hour format
Midnight and
noon displayed as
"12:00".
Press the [ENTER] key.
4 4
Set the time.
Use the [<] and [>] keys to set the hour.
Use the [<] and [>] keys to set the minutes.
The currently set day of the week and time are displayed.
If you make a mistake, repeat the procedure from the beginning.
If there is a power failure or if the system is unplugged from the wall outlet for some
time, you must reset the system clock time.
Pressing the [DISPLAY] key while the system is in the Standby mode (OFF) will
display the time for 5 seconds.
Press the [ENTER] key.
Press the [ENTER] key.
12-hour format 24-hour format
Midnight and
noon displayed as
"0:00".
Press the [ENTER] key.
Press the [ENTER] key.