Connecting And Playing Back From An Ipod; Disconnecting An Ipod - Kenwood C-707I Instruction Manual

iPod
This section explains how to connect and play back from an iPod.
56
C-707I

Connecting and Playing Back from an iPod

Use this procedure to connect an iPod to the system for playback.
Also refer to the instruction manual that comes with the iPod you are connecting.
Use the PNC-iP120 connecting cable (optional accessory) to connect an iPod.
For information about supported iPod models, see to page 27.
1 1
Connect the PNC-iP120 connection cable (optional accessory)
to connect the iPod to the [iPod] terminal on the main unit's
front panel.
Always turn this system and the iPod off before connecting the iPod.
2 2
Press the [iPodE] key to begin playback.
Perform main operations on the iPod.

Disconnecting an iPod

1 1
Turn off this system and the iPod.
2 2
Disconnect the iPod.
After you are fi nished using the iPod, disconnect its connection cable from the
[iPod] terminal.