Messages - Kenwood C-707I Instruction Manual

Messages

Displayed Message
Can't READ *
(* is a number or symbol.)
CD NO DISC
Er-CD01
NOT SUPPORT
REMOVE OK
USB NO MEDIA
** READING
(** is the media name.)
*1: In addition to audio signals, information called the Table of Contents (TOC) is recorded on each CD. The
TOC is similar to the contents page of a book and information such as the text, playing times and number
of tracks including some items that cannot be rewritten.
78
C-707I
CD disc information cannot be read correctly.
R The disc is dirty. Clean the disc. (See <Care and Storage>.) (Page 83)
R Insert the disc correctly in the center of the inlet slot. (Page 30)
The CD is loaded the other way around.
R Load the CD correctly. (Page 30)
There is no CD loaded. The CD cannot be recognized.
R Load a CD. (Page 30)
The CD unit is not operating correctly.
R Request servicing.
You are trying to play back data from a copyright protected WMA audio
fi le or from an unsupported fi le format.
There are no playable MP3 or WMA audio fi les.
The USB device can be removed safely.
R Disconnect the USB device from the [
A USB device is not connected. The USB device cannot be recognized.
R Check the connections. (Page 16)
The media's TOC *1 information is being read.
Meaning
USB] port. (Page 33)