External Components
62
C-707I
C-707I
Adjusting the Input Level
Use the procedure below to adjust the input level for the external
component connected to the [AUX IN] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same volume
setting.
1
1
Select AUX as the source.
Press the [AUX] key.
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
AUX
2
2
Adjust the input level.
Press the [<] or [>] key.
Adjusting the input level also changes the volume of the external component
connected to the [AUX IN] terminal.
D. AUDIO
You can adjust the input level in a range
from –3 to +3.