D.audio; Playing Back From A Digital Audio Player - Kenwood C-707I Instruction Manual

D.AUDIO

You can connect a Kenwood digital audio player (referred to hereafter simply as "digital audio player") to
the system and use it to play tracks.
48
C-707I

Playing Back from a Digital Audio Player

Use this procedure to connect a digital audio player to the system and play
tracks.
Also refer to the instruction manual that comes with the digital audio player you are
connecting.
Connecting the digital audio player using the dedicated cable allows you to operate
the digital audio player using the main unit or the remote control.
Compatible Kenwood digital audio players (As of November 2007)
Memory audio player
1 1
Connect the digital audio player to the [D.AUDIO IN]
terminal on the front panel of the main unit.
Always turn this system and the digital audio player off before connecting the
digital audio player.
2 2
Turn on the digital audio player.
3 3
Play back from a digital audio player.
Press the [D.AUDIOE] key.
Simply pressing the [D.AUDIOE] key turns on the system and begins
playback.
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
D.AUDIO
M2GD55, M1GD55, M1GC7, M2GC7
AUX