Table of Contents
Advertisement
REMO
REMOTE ENGINE STARTING - SUCCESSFUL START
1) Press remote start button on the remote transmitter. System will chirp 3 times for audible confirmation.
(Chirps can be programmed on or off-See installation manual.)
2) Parking lights flash once, then turn on solid, Ignition/Accessory circuits turn on.
3) After a few seconds, Starter Motor engages, Parking lights and Accessory circuits turn off while cranking.
4) Engine Starts and Runs. Parking Lights and Accessory turn back on, Doors Lock.
5) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can
be turned off with remote transmitter.
6)
REMOTE ENGINE STARTING - SUCCESSFUL START DIAGRAM:
FLASH 1X
START
THEN
SOLID
REMOTE ENGINE STARTING – LCD PAGER-REMOTE:
When requesting a remote start the LCD pager remote will confirm
with an Ignition Icon along with 3 beeps. Once the vehicle has
successfully started the remote will confirm back with 1 vibration, a
moving vehicle Icon, and 6 beeps.
REMOTE ENGINE CONTROL
IGN
TE ENGINE CONTROL
AFTER
3
SEC.
REMOTE START
(Key flashes)
9
SOLID
STARTER
Hide quick links:
Advertisement
Table of Contents
