Table of Contents
Advertisement
The CS-2014DP-TW2FM/FM system includes disarm diagnostics, through the BLUE LED light, that will help in
determining what caused the last trigger of the alarm system. This is a valuable tool in determining how the
vehicle was tampered with or if there is a false alarm problem in which case you can make the necessary
adjustments to correct the problem. When the system is disarmed with the remote you will hear the normal 2
chirps, then 4 quick chirps that indicate the alarm was triggered while you were away. Check the LED light for
a sequence of flashes:
Shock Sensor = 1 Flash
Diagnostics will reset when the Ignition is turned on or when the system is re-armed.
TRANSCEIVER / REMOTE CONTROL PROGRAMMING
Note:
All transmitter codes must be Code Learned at time of programming!
transmitter codes can be stored in the memory of the system. One remote cannot be programmed
multiple times.
1. Turn key to the ON position.
2. Press Programming button 4 times, then after a few seconds the unit will flash the parking lights 4 times.
3. Press buttons #1 (Lock) & #2 (Unlock) together at the same time of each transceiver to be learned. You
should get 2 light flashes indication the unit is waiting for a 2
transmitter or transceiver, the unit will flash 3 times indicating its waiting for the 3
th
4 times for 4
code.
otherwise turn key off.
NOTE: When Code Learning 2-Way Remotes, wait for the LCD to confirm with a beep and the antenna
ICON on the LCD screen BEFORE learning the next remote.
LED DIAGNOSTICS
Door = 2 Flashes
If all 4 codes are learned, the unit will automatically exit code learning mode,
SEE DIAGRAM ON NEXT PAGE
Hood/Trunk = 3 Flashes
nd
code, then press button #1 & #2 of a second
14
Ignition = 4 Flashes
Up to 4 different
rd
code and lights will flash
Hide quick links:
Advertisement
Table of Contents
