CrimeStopper CS-2014.DPII.FM.TW2 Operation Instructions Manual page 6

OPERATING INSTRUCTIONS - ALARM
Disarming While Tripped (Triggered):
Disarming the System while it is triggering requires TWO presses of the #2 Unlock Button. The first press of
Button #2 Resets the alarm cycle only (system still armed) while a second press will disarm/unlock the system.
Selective Silent Arming/Disarming:
To Arm or Disarm the system without siren chirps, press and
release both Buttons #2 (Unlock) and #4 (Start) at the same time.
System will Arm or Disarm without siren chirps. Flashing lights and
LED will be the only indicators of Arm/Disarm status. The LCD will
Display a musical note with an "X" when the system is armed or
disarmed without a chirp
Prior intrusion Alert SILENT ARM
SILENT DISARM
This system will notify you if the alarm was triggered while you
where away. Upon disarming, there will be four additional siren chirps after the two normal disarm chirps.
Check your vehicle for any signs of a break in or tampering. Also, see LED Diagnostics Section to determine
the cause of the trigger.
Remote Panic Protection
To sound the alarm in an emergency situation or to draw attention to your vehicle, press
and hold Button #1 (Lock) for at least 3 seconds until the siren sounds. Press Button #2
(Unlock) to reset panic mode. The LCD display will flash all the icons and emit 10 beeps
when the panic mode is triggered.
Selective Shock Sensor Disable
To arm the alarm and bypass shock sensor protection, press Button #1 as normal then
press and release Button #1 and #2 together within 2 seconds. You will hear 3 extra
siren chirps indicating shock sensor bypass for this arming cycle only. This feature useful
PANIC MODE
when parking near railroad tracks, airports, or area with excessive loud machinery or
All Icons Flash
noise to prevent the nuisance of unnecessary false alarms.
Open Door Alert / Bypass
Upon arming, this system will warn you if a door is left open. The LCD pager will vibrate and beep (15X's)
along with displaying the open zone on your LCD screen. This zone will automatically be bypassed until
closed; otherwise, the alarm will continue to protect all other zones.
6