Dell PowerEdge KVM 1081AD User Manual page 229

15 When the upgrade is complete, the startup message from step 4 appears
on the terminal screen.
Upgrading Remote Console Switch Firmware in the OSCAR
You can upgrade the Remote Console Switch firmware version directly from
the OSCAR interface. If using IPv4 mode, you may use either a TFTP server
or an FTP server. If using IPv6 mode, you must use an FTP server. To upgrade
the firmware, you need to know the IP address of the server, the filename of
the firmware FLASH file, and, if using an FTP server, the username and
password for the FTP server. You will also need to make sure that the file is in
the appropriate folder.
To upgrade the Remote Console Switch firmware:
1 Press <Print Screen>. The Main dialog box displays.
2 Click Commands - Display Versions. The Versions dialog box displays.
3 Click Upgrade. The Download dialog box is displayed.
Figure D-1. Download Dialog Box
4 If you are in IPv4 mode and are using a TFTP server, select TFTP.
-or-
If you are in IPv4 mode and are using an FTP server, select FTP.
NOTE:
If you are in IPv6 mode, the FTP button will automatically be selected and
the TFTP button will be grayed out and may not be selected.
interface
Appendix D: FLASH Upgrades
213