Dell PowerEdge KVM 1081AD User Manual page 143

To save a user database from a Remote Console Switch:
1 Click the Tools tab in the on-board web interface. The Tools window
appears.
2 Click the Save Remote Console Switch User Database button. The Save
Remote Console Switch User Database window appears.
3 Click Browse and navigate to a location to save the user database file. The
location appears in the Save To field.
4 Click Save. The Enter Password window opens.
5 Enter a password in the Password field, then repeat the password in the
Verify Password field. This password is requested when you restore this
database to a Remote Console Switch. Click OK. The user database file is
read from the Remote Console Switch and saved to a location. A progress
window displays.
6 When complete, a message appears prompting you to confirm the read
completion. Once confirmed, the Save Remote Console Switch User
Database window will close and you are returned to the Tools window.
To restore a user database file to a Remote Console Switch:
1 Click the Tools tab in the on-board web interface. The Tools window
appears.
2 Click the Restore Remote Console Switch User Database button. The
Restore Remote Console Switch User Database window appears.
3 Click Browse and navigate to the location where you stored the saved user
database file. The file name and location appears in the File name field.
4 Click Restore. The Enter Password window opens.
5 Enter the password you created when the user database was saved. Click
OK. The user database file is written to the Remote Console Switch. A
progress window displays.
6 When complete, a message appears prompting you to confirm the write
completion. Once confirmed, the Restore User Database File window will
close and you are returned to the Tools window.
Managing Your Remote Console Switch Using the On-board Web Interface
127