Dell PowerEdge KVM 1081AD User Manual page 216

Trap Trap Message
ID
21 Configuration
file loaded in the
Remote Console
Switch.
Command
issued by user:
%s. Name of file
loaded: %s.
22 User database
file loaded in the
Remote Console
Switch.
Command
issued by user:
%s. Name of file
loaded: %s.
23 Invalid
connection
detected. Device
ID: %s.
200
Appendix C: MIBs and SNMP Traps
Severity Description
Informational The Remote Console Switch has loaded a
configuration file.
The name of the user who commanded the
Remote Console Switch to load the
configuration file is contained in
dsTrapObjectUserName.
The name of the file that was loaded is
contained in dsTrapObjectFileName.
Informational The Remote Console Switch has loaded a
user database file.
The name of the user who commanded the
Remote Console Switch to load the user
database file is contained in
dsTrapObjectUserName.
The name of the file that was loaded is
contained in dsTrapObjectFileName.
Informational The Remote Console Switch has detected an
invalid connection.
This can include two SIP devices on a port
where one or more have a legacy KVM
Switch, or some other illegal setup condition.
Information about the nature of the failure is
stored in the
dsTrapObjectFirmwareCondition object.
NOTE:
sent.
This trap is deprecated and is no longer