Displaying Version Information; Scanning Your System - Dell PowerEdge KVM 1081AD User Manual

Displaying Version Information

The OSCAR interface enables you to display the versions of the Remote
Console Switch and the SIP module firmware. For optimum performance,
keep your firmware current. For more information, see "Appendix D: FLASH
Upgrades" on page 211.
To display version information:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Commands - Display Versions
top half of the box lists the subsystem versions in the appliance.
Figure 3-11. Version Dialog Box
3 Click the SIP button to view individual SIP module version
information.The SIP Select dialog box displays.
4 Select a SIP module to view and click the Version button. The SIP Version
dialog box displays.
5 Click X to close the SIP Version dialog box.

Scanning Your System

In scan mode, the appliance automatically scans from port to port (device to
device). You can scan up to 100 devices, specifying which devices to scan, and
the number of seconds that each device displays. The scanning order is
52
Controlling Your System at the Analog Ports
The Version dialog box displays. The
.