Dell PowerEdge KVM 1081AD User Manual page 166

Select Start - Control Panel - Add or Remove Programs.
a
Select Add/Remove Windows Components.
b
In the Windows Components Wizard, select the Certificate Services
c
check box.
Select Enterprise root CA as CA Type and click Next.
d
Enter Common name for this CA, click Next, and click Finish.
e
2 Enable SSL on each of your domain controllers by installing the SSL
certificate for each controller.
Click Start - Administrative Tools - Domain Security Policy.
a
Expand the Public Key Policies folder, right-click Automatic
b
Certificate Request Settings and click Automatic Certificate
Request.
In the Automatic Certificate Request Setup Wizard, click Next and
c
select Domain Controller.
3 Click Next and click Finish.
A certificate/private key file can be created using openssl using Linux.
Openssl can be downloaded from openssl.org. Any instructions below with
text in <> is where a user would need to set a value based on the criteria at
the end of that line.
To create a certificate to import:
1 From the Linux command prompt, type openssl and hit Enter. The user
should be at the OpenSSL prompt.
OpenSSL> genrsa -out privatekey.pem <512>
Generating RSA private key, 512 bit long modulus
..........++++++++++++
.....++++++++++++
e is 65537 (0x10001)
OpenSSL> req -new -key privatekey.pem -x509 -out certificate.pem-batch
-days <365>
150
LDAP Feature for the Remote Console Switch