Dell PowerEdge KVM 1081AD User Manual page 218

Trap Trap Message
ID
30 Subsystem
upgrade failed.
Device ID: %s.
31 Warning
condition.
Device ID: %s.
Alarm condition:
%d. Alarm
description: %s.
32 Urgent
condition.
Device ID: %s.
Alarm condition:
%d. Alarm
description: %s.
33 User account
has been locked.
Client IP
Address: %s.
Locked user: %s.
Reason: %s.
202
Appendix C: MIBs and SNMP Traps
Severity Description
Informational The Remote Console Switch has detected a
special condition resulting in a failed
subsystem update. The condition has been
recorded is stored in the
dsTrapObjectFirmwareCondition object.
Minor The Remote Console Switch has detected a
special condition to be trapped for warning
the operator. The condition indicates some
parameter outside of normal operation, such
as over temperature range. These are not
expected to result in unusual behavior, but
may be precursor to a subsequent urgent
condition.
Critical The Remote Console Switch has detected a
special condition to be trapped for alerting
the operator. The condition indicates some
parameter outside of normal operation that is
expected to result in unpredictable system
behavior.
Minor A user account has been locked.
The IP address of the client is contained in
dsTrapObjectIPAddress.
The name of the user who was locked is
contained in dsTrapObjectTargetUserName.
The reason for which the user account has
been locked is contained in
dsTrapObjectLockReason.