Pdu Inlets Window - Dell PowerEdge KVM 1081AD User Manual

1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - PDUs.
3 Complete one of the following steps:
Select a PDU name, then click Settings to open the PDU Settings window.
-or-
Select a PDU name, then press <Enter> to open the PDU Settings
window.
-or-
Double-click on the PDU name to open the PDU Settings window.
4 Complete any of the following steps:
In the Name field, enter the PDU name.
a
In the Cycle Delay field, enter the number of seconds you want the
b
Remote Console Switch to wait between turning off and turning on.
5 Click OK.

PDU Inlets window

From the Inlets window, you can view and modify inlet parameters.
NOTE:
You can only modify inlet parameters on a PDU that is currently online.
To view/modify PDU Inlet settings:
1 Press <Print Screen> to launch the OSCAR interface. The Main dialog
box appears.
2 Click Setup - PDUs.
3 Complete one of the following steps:
Select a PDU name, then click Settings to open the PDU Settings window.
-or-
Select a PDU name, then press <Enter> to open the PDU Settings
window.
-or-
Double-click on the PDU name to open the PDU Settings window.
Controlling Your System at the Analog Ports
61