Call Home Setup Fields - HP StorageWorks 8/20q User Manual

Table 16 describes the fields of the Call Home Setup dialog box.
Table 16

Call Home Setup fields

Field
Primary SMTP: (active)
Primary SMTP Server
Address:
Primary SMTP Server Port:
Secondary SMTP:
Secondary SMTP Server
Address:
Secondary SMTP Server
Port:
Contact Email Address:
Phone Number:
Street Address:
80 Managing switches
Description
(active) indicates that the Primary SMTP (Simple Mail
Transfer Protocol) is the SMTP server that Call Home is
going to try to use when transmitting e-mail messages. Call
Home operates as an SMTP sending agent.
After any system configuration, the Primary SMTP server will
always become the active SMTP, provided it is enabled and
has a non-default address defined (0.0.0.0 is the default).
The IP address of the primary (first) SMTP server.
The service port number that the primary SMTP server is
listening on to accept connections from SMTP sending
agents.
The second SMTP server. If the primary SMTP is not
enabled/defined, or if there is a failure in communicating
with the primary SMTP server, the Secondary SMTP server
will become the (active) SMTP server - the one used by Call
Home for the next attempt to transmit e-mail.
The IP address of the secondary SMTP server.
The service port number that the secondary SMTP server is
listening on to accept connection from SMTP sending
agents.
The e-mail address of the point-of-contact for the switch. This
e-mail address will be included in the text of e-mail
messages using the FullText format under the section for
Contact Information.
The phone number of the point-of-contact for the switch. This
value will be included in the text of e-mail messages using
the FullText format under the section for Contact Information.
The address of the point-of-contact for the switch. This value
will be included in the text of e-mail messages using the
FullText format under the section for Contact Information.