Network Properties; Network Properties Dialog Boxes - HP StorageWorks 8/20q User Manual
Hp storageworks 8/20q fibre channel switch quicktools switch management user guide (5697-7759, january 2009)
Hide thumbs
Also See for StorageWorks 8/20q:
- Command line interface manual (330 pages) ,
- Reference manual (188 pages) ,
- User manual (160 pages)
Table of Contents
Advertisement
Network properties
Use the Network Properties dialog boxes
1.
Open the Network Properties dialog box, using one of the following methods:
• Open the faceplate display for the switch you are configuring, and then select Switch > Network
Properties, or
• Right-click a switch graphic in the faceplate display, and then select Network Properties from the
popup menu.
2.
Click the IP tab to open the Network Properties IP dialog box or the DNS tab to open the Network
Properties DNS dialog box, as appropriate for your network setup.
3.
Make the desired changes to the network properties.
4.
After making changes, click OK to put the new values into effect.
Figure 29
Network Properties dialog boxes
64
Managing switches
(Figure
29) to configure IP and DNS parameters.
Advertisement
Table of Contents
