Add Tr Mapping Dialog; Mapping A New Inter-Fabric Zone - HP StorageWorks 8/20q User Manual

Add TR Mapping dialog

The Add TR Mapping dialog
dialog displays the selectable local devices, remote devices, and TR-configured ports that can be mapped
to the inter-fabric zone. The Add TR Mapping dialog is displayed after you click Add or select Edit > Add
in the TR Mapping Manager dialog.
NOTE: You can map a remote device through multiple TR ports, as long as each of those TR ports are on
different 8/20q Fibre Channel Switches.
Select a local device from the 1 Select a Local Device column to display the selectable remote devices in the
2 Select a Remote Device column. After selecting a remote device, the selectable TR ports are displayed in
the 3 Select a TR Port column.
Figure 7

Add TR Mapping dialog

Mapping a new inter-fabric zone

NOTE: The local fabric port to be used in the inter-fabric zone must be configured as a TR_Port before the
devices are mapped. See
To map a new inter-fabric zone:
1. Open the faceplate display, and select Fabric > TR Mapping Manager.
2. In the TR Mapping Manager dialog
3. In the Add TR Mapping dialog
Select a remote device from the 2 Select a Remote Device column.
4.
5. Select a TR port from the 3 Select a TR Port column.
After selecting an option from the 3 Select a TR Port column, the OK button becomes active.
6. Click OK to save the changes and close the Add TR Mapping dialog.
7. Verify that the new TR mapping members are displayed in the TR Mapping list of the TR Mapping
Manager dialog, and click OK.
(Figure 7) allows you to map a new inter-fabric zone. The Add TR Mapping
"Port types" on page 98 for information on changing port types.
(Figure 6), click Add or select Edit > Add.
(Figure 7), select a local device from the 1 Select a Local Device column.
8/20q Fibre Channel Switch QuickTools switch management user guide 25