HP StorageWorks 8/20q User Manual page 86

Table 1 1 Switch data window fields (continued)
Field
Test Fault Code
Network Group
IPv4 Enabled
IPv4 Address
IPv4 Subnet Mask
IPv4 Gateway
IPv6 Enabled
IPv6 Address
IPv6 Gateway
SNMP Enabled
SNMP v3 Security Enabled
Broadcast Support
NTP Client Enabled
NTP Server Address
DNS Enabled
Configured Local Hostname
Assigned Hostname
IPv6 Assigned Address (1–20)
User Login Group
User Name
Login Level
Super User
UserAuthentication Enabled
Firmware Group
Firmware Version
Inactive Firmware Version
Pending Firmware Version
PROM/Flasher Version
86 Managing Switches
Description
Code value for the last recorded diagnostic test status recorded on
the switch
Internet Protocol version 4 Enabled or Disabled
Internet Protocol version 4 address
Mask that determines the IP address subnet
Gateway address
Internet Protocol version 6 Enabled or Disabled
Mask that determines the IP address subnet
Gateway address
SNMP Enabled or Disabled
SNMP v3 Security Enabled or Disabled
Broadcast support status. Broadcast support is enabled (default) or
disabled.
NTP Client Enabled or Disabled. If Enabled, this parameter enables
switches to synchronize their time to a centralized server.
IP address of the centralized NTP server. Ethernet connection to NTP
server is required.
Domain Name Service Enabled or Disabled
Requested hostname for the switch. If a fully qualified domain name is
given, the domain suffix is used as the first suffix in the DNS search
list for DNS lookups performed by the switch.
Actual hostname for the switch. If a fully qualified domain name is
given, the domain suffix is used as the first suffix in the DNS search
list for DNS lookups performed by the switch.
The set of IPv6 addresses assigned by DHCP v6, NDP, or the switch
administrator
Account name
Authority level of the user name
Super user privileges Enabled or Disabled
Enforcement of account names and authority (always True)
Active firmware version
This field does not apply to this switch
Firmware version that is activated at the next reset
Installed version of PROM firmware