HP StorageWorks 8/20q User Manual page 24

Table 3 Faceplate menu bar options (continued)
Option
Stack
These options are available
when a stack is selected in
the fabric tree.
Port
These options are available
when a port is selected in
the faceplate display.
Zoning
Options marked with an
asterisk (*) are available
only when a switch is
selected in the fabric tree.
24 Using Enterprise Fabric Management Suite
Sub-options
Refresh Stack
Select All Ports
Syslog
SNMP Properties
Set Date/Time
User Accounts
Security Consistency Checklist
Reset
Hot Reset
Reset
Hard Reset
Load Firmware
Move Switch Up (available when a switch other than the top
switch in a stack is selected in the faceplate display)
Move Switch Down (available when a switch other than the
bottom switch in a stack is selected in the faceplate display)
Remove Switch (available when a switch in a stack is
selected in the faceplate display)
Remove Links (available when an active port with an ISL
connected is selected)
Port Properties
Advanced Port Properties
Reset Port
Port Binding
Port Diagnostics
Online Port Diagnostics
Offline Port Diagnostics
Move Port (available only when there are unlicensed ports)
Edit Zoning*
Resolve Zoning*
Capture Active Zoning
Restore Configured Zoning
Capture Merged Zoning
View Merged/Configured Differences
Edit Zoning Config*
Activate Zoneset*
Deactivate Zoneset*
Restore Default Zoning