Install Software - Canon PIXMA MX860 Getting Started

12
Setup the Machine and the Computer
Install the Software
If the Found New Hardware or Found New
Hardware Wizard dialog box appears:
A
C
E
1
Remove the USB cable connected to
your computer.
The dialog box may close. In this case, proceed
G
from step .
H
2
Click Cancel to quit the dialog box.
3
Proceed from step
J

1
A
TURN OFF THE MACHINE (A).
.
• Operating noise continues for about 30 seconds
until the machine turns off. Make sure that the
mode button (B) stops flashing.
B
Windows
2
Turn on the computer, then insert the Setup CD-
ROM into the CD-ROM drive.
The setup program should start automatically.
Windows Vista
Go to Step
Windows XP/2000
Go to Step
• If the program does not start automatically, double-click the
CD-ROM icon on the computer. When the CD-ROM contents
appear, double-click MSETUP4.EXE.
Macintosh
.
.