Canon PIXMA MX860 Getting Started page 41

Windows Vista Go to Step
Windows XP/2000 Go to Step
7
Windows XP/2000
When the Network Setup of the Card
.
Slot dialog box appears, specify the
drive letter, then click Next.
.
• If an error message appears, refer to "5 The
following screen is displayed during setup"
in the printed manual: Network Setup
Troubleshooting.
Windows
8
When the Setup Completion dialog box appears, remove the
USB cable, then click Finish.
• To change the port name, click View Setup Results, then click Set Port
Name. For details, refer to "8 Changing the port name" in the printed
manual: Network Setup Troubleshooting.
• If Unsafe Removal of Device is displayed, click OK.
Next, read "17 Information" on page 43!
Macintosh
H