5
Install the Ink Tanks
•
Handle the ink tanks carefully. Do not drop or
apply excessive pressure to them.
•
If the Print Head Holder moves to the right, close
and reopen the Scanning Unit (Cover).
•
Be sure to use the supplied ink tanks.
1
2
Pull the orange tape (1) in the direction of the
arrow to peel off the protective film and remove
the film (2) completely.
2
A
1
While pressing down with your left thumb, twist off
the orange protective cap (A) located on the bottom
of the ink tank.
•
Do not hold the sides of the ink tank; ink may splash.