Canon PIXMA MX860 Getting Started page 22

10
9
Make sure that Push button
E
method is selected and press the
OK button.
F
• To use the PIN code method for setup, select PIN code method on step
the OK button. Follow the on-screen is instructions to operate the machine and access
point. When the setup is complete, the completion screen appears. Press the OK button,
then the LAN settings screen returns. A timeout error occurs if setup is not completed
within 10 minutes. If the timeout error screen appears, refer to "5.12 The Timeout
error screen is displayed during WPS setup" in the printed manual: Network Setup
Troubleshooting.
0
10
Press the OK button.
, then press
11
When the access point is ready, press the OK button on the machine, then
press the WPS button on the access point within two minutes.
When the completion screen appears, press the OK button. The LAN settings screen
returns.
• A timeout error occurs if setup is not completed within two minutes. When the timeout error
screen appears, refer to "5.12 The Timeout error screen is displayed during WPS setup" in
the printed manual: Network Setup Troubleshooting.
• The WPS button may be named differently depending on your access point. For details,
refer to the manual of your access point.
Next, read "Install the Software" !
Windows Macintosh
P.26
Windows
P.46
Step
Macintosh