Canon PIXMA MX860 Getting Started page 55

If the following screen appears
When the Access Points screen appears, select an access point to
use, then click Connect.
When an access point is detected automatically, the Access Points screen
does not appear.
• To connect to the access point with WEP, WPA or WPA2 displayed in the
Encryption column, enter the network password, then click Connect. For
details on network passwords, refer to "3.1 About Network Key (Windows)/
Network Password (Macintosh)" in the printed manual: Network Setup
Troubleshooting.
• If you want to select an access point manually, or if the target access point
is not displayed in the list, or if an error message appears, refer to "5 The
following screen is displayed during setup" in the printed manual: Network
Setup Troubleshooting.
If the following screen appears
When the Set Printer IP Address screen appears, click Connect.
If the machine is detected automatically, the Set Printer IP Address screen
does not appear.
• If no connection is established even after Connect is clicked, refer to "5.6 The
Set Printer IP Address screen is displayed during setup" in the printed manual:
Network Setup Troubleshooting.
Windows Macintosh
D