Canon PIXMA MX860 Getting Started page 12

5
6
B
C
Lift the Scanning Unit (Cover) (B) slightly and
fold the Scanning Unit Support (C), then gently
close the Scanning Unit (Cover) (B).
• Wait until the screen above appears (about
4 minutes) and go to the next step.
• The machine may make some operating
noises when preparing to print. This is
normal operation.
• If an error message is displayed on the LCD, make
sure that the Print Head and the ink tanks are correctly
installed.
0
7
D
Load three or more sheets of A4
or Letter-sized plain paper into the
Cassette (D), then press the OK
button.
• For details, refer to "24 Loading Paper"
on page 63.
• Close the Paper Output Tray to make it
easier to pull out the Cassette.
8
Press the OK button.
The standby screen is displayed.
• For better print results, it is recommended that you align the Print Head before
printing photos. To align the Print Head, use the { or } button to select
Perform head align and press the OK button. Follow the steps in "Align the
Print Head" on page 73 for alignment.
• You can perform Print Head Alignment at any time. For details, refer to the on-
screen manual: Basic Guide.