Introduction; System Requirements; Compatibility Information; Before You Begin - Adaptec SCSI 58300 Installation And User Manual

Introduction

The AFU is a text-based DOS utility used to update, save, or verify your HostRAID controller's
firmware BIOS and Non-Volatile Random Access Memory (NVRAM).
The AFU is easy to use and contains safeguards to prevent you from accidentally damaging the
HostRAID controller's flash contents. Still, you must be careful to use the AFU correctly,
otherwise, you could render the HostRAID controller inoperable.

System Requirements

The requirements for AFU are as follows:
MS–DOS version 5.0 or later. It cannot run from a DOS command prompt window under
●
any version of Windows.
Note:
You can't run the AFU from a DOS command prompt window under any version of Windows.
At least 8 MB of extended memory.
●

Compatibility Information

The AFU has the following compatibility issues:
Supports HIMEM.SYS and is compatible with other DOS drivers running under
●
HIMEM.SYS (for example, SMARTDRV.SYS and SETVER.SYS).
Does not support DOS extenders installed in memory, such as EMM386.SYS and
●
DOS4GW.

Before You Begin

Before running the AFU, complete these tasks:
Obtaining the Firmware on page 79
●
Creating the Firmware Kit On Floppy Disks on page 80
●

Obtaining the Firmware

To obtain HostRAID controller firmware, go to:
The HostRAID Installation CD—Includes the AFU executable (AFU.exe) and a separate flash
image. The flash image may comprise multiple User Flash Image (UFI) files.
The Adaptec Web site (www.adaptec.com)—Download a new firmware file to get the most
recent version of AFU.
Appendix D: Using the Adaptec Flash Utility for DOS
79
●