Adaptec SCSI 58300 Installation And User Manual page 39

3
Review the license information, then press Enter.
The Main Menu opens.
4
Click Launch Configuration Utility.
Adaptec Storage Manager opens.
5
Click Create.
The Configuration wizard opens.
6
Select Express configuration..., then click Next.
7
Review the information that is displayed.
Note:
Adaptec Storage Manager uses the term logical drives when referring to arrays.
In this example, Adaptec Storage Manager has used two equal-sized disk drives to
automatically create one logical drive with RAID 1.
To specify a size for the logical drives, or to make other changes to the configuration, click
Modify logical devices.
8
Click Apply, then click Yes when prompted to confirm applying your new configuration.
Adaptec Storage Manager builds the logical drive(s).
The configuration is saved on the Adaptec controller (as an "array" ) and on the physical
disk drives.
Chapter 6: Creating a Bootable Array
l 39